  |
||||||||
 |
||||||||
 |
||||||||
 |
||||||||
| 2 PCF
POLYURETHANE ESTER FOAM Grey in colour, this open cell foam is ideal for protecting very sensitive lightweight components. It is not recommended for heavier components because the foam easily deforms / compresses and may result in the component “bottoming out” in the case. This foam can be cut manually, by CNC router, CNC waterjet and die stamping. |
||||||||
| 2 PCF
ANTI-STATIC POLYURETHANE ESTER FOAM Pink in colour, this is the anti-static version of the above. If you have an application where there is a concern regarding static discharge, this is an appropriate foam to use. It is important to note that the anti-static properties of all anti-static foams will dissipate over time and the colour will gradually “yellow”. 2 PCF POLYETHYLENE FOAM Black in colour, this closed cell foam has a large cell size (coarse in texture). It is a rigid foam and is the most commonly used cushioning material in the packaging industry. It offers protection for moderately sensitive components ranging from lightweight to heavy (> 200 lbs.). This foam is available in densities greater than the standard 2 lbs. per cubic foot (PCF) and thus is ideal for very heavy payloads such as engines. This foam can be cut manually, by CNC router, CNC waterjet and die stamping. 2 PCF ANTI-STATIC POLYETHYLENE FOAM Pink in colour, this is the anti-static version of the above. If you have an application where there is a concern regarding static discharge, this is an appropriate foam to use. It is important to note that the anti-static properties of all anti-static foams will dissipate over time and the colour will gradually “yellow”. CROSS-LINKED POLYETHYLENE FOAMS Cross-linked polyethylene foams are premium grade foam products. They possess a very fine, closed cell structure, with a more refined surface texture than standard polyurethane and polyethylene foams. Cross linking yields a very strong molecular bond giving the foam increased tear resistance and geometric memory (return to original shape after deformation). Ideal for applications where high aesthetics or washable surfaces are of importance, cross linked polyethylene foams are available in a variety of densities and colours (gray and black are standard). These foam products are typically cut by CNC router, CNC waterjet and die stamping. SPECIALTY FOAMS Military grade, fire retardant and special property foams are available upon request. |
||||||||
   |
||||||||
 |
||||||||
|
||||||||